dmesg - AMD Athlon 64 3500
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.23.2.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Oct 16 18:37:12 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfeb7f00 (usable)
BIOS-e820: 00000000bfeb7f00 - 00000000c8000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xF9C00
DMI: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v01.04 09/21/2006
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF8000000 write-back
3 base 00C0000000 mask FFF8000000 uncachable
4 base 0100000000 mask FFE0000000 write-back
5 base 0120000000 mask FFF0000000 write-back
6 base 0130000000 mask FFF8000000 write-back
7 disabled
TOM2: 0000000138000000 aka 4992M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3GB, range: 128MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
reg 6, base: 4864MB, range: 128MB, type WB
total RAM covered: 3072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfeb7 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfeb7000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfeb7000 page 4k
kernel direct mapping tables up to bfeb7000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000138000000
0100000000 - 0138000000 page 2M
kernel direct mapping tables up to 138000000 @ b000-11000
RAMDISK: 37324000 - 37fef250
ACPI: RSDP 00000000000e7610 00014 (v00 COMPAQ)
ACPI: RSDT 00000000bfec7f40 0003C (v01 HPQOEM SLIC-BPC 20060921 00000000)
ACPI: FACP 00000000bfec7fe8 00074 (v01 COMPAQ HP_RS485 00000001 00000000)
ACPI: DSDT 00000000bfec830b 090D1 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000bfec7f00 00040
ACPI: APIC 00000000bfec805c 00068 (v01 COMPAQ HP_RS485 00000001 00000000)
ACPI: ASF! 00000000bfec80c4 00063 (v32 COMPAQ HP_RS485 00000001 00000000)
ACPI: MCFG 00000000bfec8127 0003C (v01 COMPAQ HP_RS485 00000001 00000000)
ACPI: TCPA 00000000bfec8163 00032 (v01 COMPAQ HP_RS485 00000001 00000000)
ACPI: SLIC 00000000bfec8195 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000138000000
Bootmem setup node 0 0000000000000000-0000000138000000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000040000 - 0000000000066fff] pages 27
(8 early reservations) ==> bootmem [0000000000 - 0138000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0e4] TEXT DATA BSS ==> [0001000000 - 000201b0e4]
#3 [0037324000 - 0037fef250] RAMDISK ==> [0037324000 - 0037fef250]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000201c000 - 000201c0fb] BRK ==> [000201c000 - 000201c0fb]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4992MB)
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00138000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000bfeb7
0: 0x00100000 -> 0x00138000
On node 0 totalpages: 1015381
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767727 pages, LIFO batch:31
Normal zone: 3136 pages used for memmap
Normal zone: 226240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000bfeb7000 - 00000000bfeb8000
PM: Registered nosave memory: 00000000bfeb8000 - 00000000c8000000
PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
Allocating PCI resources starting at c8000000 (gap: c8000000:18000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u1048576
pcpu-alloc: s94552 r8192 d24232 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 997806
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 4746000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 3776084k/5111808k available (5223k kernel code, 1050284k absent, 285440k reserved, 7119k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:424
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2194.456 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.91 BogoMIPS (lpj=2194456)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
mce: CPU supports 5 MCE banks
using C1E aware idle routine
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21439 entries in 85 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (4388.91 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [d8000000, dfffffff]
node 0 link 0: mmio [c8000000, d7ffffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000138000000 aka 4992M
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [c8000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [138000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e40fffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801366c4a10), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xdfffffff] (ignored)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10: [io 0x3030-0x3037]
pci 0000:00:12.0: reg 14: [io 0x3050-0x3053]
pci 0000:00:12.0: reg 18: [io 0x3038-0x303f]
pci 0000:00:12.0: reg 1c: [io 0x3054-0x3057]
pci 0000:00:12.0: reg 20: [io 0x3000-0x300f]
pci 0000:00:12.0: reg 24: [mem 0xd8a09000-0xd8a093ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10: [mem 0xd8a04000-0xd8a04fff]
pci 0000:00:13.1: reg 10: [mem 0xd8a05000-0xd8a05fff]
pci 0000:00:13.2: reg 10: [mem 0xd8a06000-0xd8a06fff]
pci 0000:00:13.3: reg 10: [mem 0xd8a07000-0xd8a07fff]
pci 0000:00:13.4: reg 10: [mem 0xd8a08000-0xd8a08fff]
pci 0000:00:13.5: reg 10: [mem 0xd8a09800-0xd8a098ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10: [io 0xfc00-0xfc0f]
pci 0000:00:14.0: reg 14: [mem 0xd8a09400-0xd8a097ff]
pci 0000:00:14.1: reg 10: [io 0x3040-0x3047]
pci 0000:00:14.1: reg 14: [io 0x3058-0x305b]
pci 0000:00:14.1: reg 18: [io 0x3048-0x304f]
pci 0000:00:14.1: reg 1c: [io 0x305c-0x305f]
pci 0000:00:14.1: reg 20: [io 0x3020-0x302f]
pci 0000:00:14.2: reg 10: [mem 0xd8a00000-0xd8a03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:05.0: reg 14: [io 0x2000-0x20ff]
pci 0000:01:05.0: reg 18: [mem 0xd8500000-0xd850ffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:05.1: reg 14: [mem 0xd8510000-0xd851ffff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd8500000-0xd87fffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd81fffff 64bit pref]
pci 0000:3f:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
pci 0000:3f:00.0: PME# supported from D3hot D3cold
pci 0000:3f:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 3f-3f]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xd8200000-0xd84fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:09.0: reg 10: [io 0x1000-0x10ff]
pci 0000:07:09.0: reg 14: [mem 0xd8b00000-0xd8b000ff]
pci 0000:07:09.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:07:09.0: supports D1 D2
pci 0000:07:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:09.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:14.4: bridge window [mem 0xd8b00000-0xd8dfffff]
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IGFX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801366c4a10), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801366c4a10), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource jiffies
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077d]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [irq 4]
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0050-0x0053]
pnp 00:0b: [io 0x0072-0x0077]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x04d0-0x04df]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0400-0x041f]
pnp 00:0c: [io 0x0420-0x043f]
pnp 00:0c: [io 0x0440-0x045f]
pnp 00:0c: [io 0x0460-0x047f]
pnp 00:0c: [io 0x0480-0x048f]
pnp 00:0c: [io 0x0800-0x081f]
pnp 00:0c: [io 0x0820-0x083f]
pnp 00:0c: [io 0x0840-0x085f]
pnp 00:0c: [io 0x0860-0x087f]
pnp 00:0c: [io 0x0c00-0x0c1f]
pnp 00:0c: [io 0x0c50-0x0c6f]
pnp 00:0c: [io 0x0cd0-0x0cdf]
pnp 00:0c: [io 0xf800-0xf81f]
pnp 00:0c: [io 0xf820-0xf83f]
pnp 00:0c: [io 0xf840-0xf85f]
pnp 00:0c: [io 0xf860-0xf87f]
pnp 00:0c: [io 0xfa00-0xfa3f]
pnp 00:0c: [io 0xfe00-0xfe7f]
pnp 00:0c: [io 0xfe80-0xfeff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xc7ffffff]
pnp 00:0d: [mem 0x000e4000-0x000fffff]
pnp 00:0d: [mem 0xfec01000-0xfecfffff]
pnp 00:0d: [mem 0xfed00000-0xfed3ffff]
pnp 00:0d: [mem 0xfed40000-0xffffffff]
pnp 00:0d: [mem 0xe0000000-0xefffffff]
pnp 00:0d: [mem 0x000d0000-0x000e3fff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:0b: [io 0x04d0-0x04df] has been reserved
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0x0800-0x081f] has been reserved
system 00:0c: [io 0x0820-0x083f] has been reserved
system 00:0c: [io 0x0840-0x085f] has been reserved
system 00:0c: [io 0x0860-0x087f] has been reserved
system 00:0c: [io 0x0c00-0x0c1f] has been reserved
system 00:0c: [io 0x0c50-0x0c6f] has been reserved
system 00:0c: [io 0x0cd0-0x0cdf] has been reserved
system 00:0c: [io 0xf800-0xf81f] has been reserved
system 00:0c: [io 0xf820-0xf83f] has been reserved
system 00:0c: [io 0xf840-0xf85f] has been reserved
system 00:0c: [io 0xf860-0xf87f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:0d: [mem 0x000e4000-0x000fffff] could not be reserved
system 00:0d: [mem 0xfec01000-0xfecfffff] has been reserved
system 00:0d: [mem 0xfed00000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x000d0000-0x000e3fff] has been reserved
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:14.4: BAR 15: assigned [mem 0xd8800000-0xd88fffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd8500000-0xd87fffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd81fffff 64bit pref]
pci 0000:3f:00.0: BAR 0: assigned [mem 0xd8200000-0xd820ffff 64bit]
pci 0000:3f:00.0: BAR 0: set to [mem 0xd8200000-0xd820ffff 64bit] (PCI address [0xd8200000-0xd820ffff]
pci 0000:00:07.0: PCI bridge to [bus 3f-3f]
pci 0000:00:07.0: PCI bridge to [bus 3f-3f]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xd8200000-0xd84fffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:07:09.0: BAR 6: assigned [mem 0xd8800000-0xd883ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 07-07]
pci 0000:00:14.4: PCI bridge to [bus 07-07]
pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:14.4: bridge window [mem 0xd8b00000-0xd8dfffff]
pci 0000:00:14.4: bridge window [mem 0xd8800000-0xd88fffff pref]
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd8500000-0xd87fffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xd81fffff 64bit pref]
pci_bus 0000:3f: resource 1 [mem 0xd8200000-0xd84fffff]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xd8b00000-0xd8dfffff]
pci_bus 0000:07: resource 2 [mem 0xd8800000-0xd88fffff pref]
pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:13.0: PCI INT A disabled
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.1: PCI INT B disabled
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
pci 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.2: PCI INT C disabled
pci 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.3: PCI INT B disabled
pci 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.4: PCI INT C disabled
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
pci 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.5: PCI INT D disabled
pci 0000:01:05.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13100k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1383227470.424:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7400
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 11EE41BC87D92128
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:07.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xd8a09800
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd8a04000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xd8a05000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xd8a06000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xd8a07000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xd8a08000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2013-10-31 13:51:12 UTC (1383227472)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 900k freed
Freeing unused kernel memory: 1672k freed
dracut: dracut-004-303.el6
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
dracut: Starting plymouth daemon
ahci 0000:00:12.0: version 3.0
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xd8a09000 port 0xd8a09100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xd8a09000 port 0xd8a09180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xd8a09000 port 0xd8a09200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xd8a09000 port 0xd8a09280 irq 22
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-51, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI: 5
ata2.00: ATAPI: ATAPI DVD C DH48CYS, VH34, max UDMA/100
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM ATAPI DVD C DH48CYS VH34 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x3040 ctl 0x3058 bmdma 0x3020 irq 16
ata6: PATA max UDMA/100 cmd 0x3048 ctl 0x305c bmdma 0x3028 irq 16
ACPI: WMI: Mapper loaded
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1383227475.333:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.129d (January 25, 2013)
tg3 0000:3f:00.0: enabling device (0104 -> 0106)
tg3 0000:3f:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
tg3 0000:3f:00.0: setting latency timer to 64
tg3 0000:3f:00.0: eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:e0:74:5f
tg3 0000:3f:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:3f:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:3f:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Oct 16 2013
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
tulip 0000:07:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
eth1: Lite-On PNIC-II rev 37 at MMIO 0xd8b00000, 00:a0:cc:37:57:d7, IRQ 21.
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
Adding 4094968k swap on /dev/sda2. Priority:-1 extents:1 across:4094968k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth1: no IPv6 routers present
udev: starting version 147
udev: starting version 147
Plex Media Serv[20514]: segfault at fffffffffffffff8 ip 00007f49f60ce25b sp 00007fff5ad42380 error 4 in libstdc++.so.6.0.13[7f49f6031000+e8000]
i2c /dev entries driver
smsc47b397: found SMSC SCH5317 (base address 0x0480, revision 2)